by Kieran Ruffell | Apr 11, 2024 | Product guides, Sungrow
If you have changed your internet provider, WiFi network name (SSID), or password you will need to reconnect your inverter to your WiFi network. Follow the steps below to do this using the iSolarCloud app. Step 1: Open the iSolarCloud app and tap the Support button at...
by Kieran Ruffell | Apr 11, 2024 | Product guides, Sungrow
Setting a time to charge your battery from the grid can allow you to achieve more savings if you have lower power rates at night or free hour/s of power. If you have a scheduled power outage or bad weather coming you may want to charge your battery to ensure that you...
by Lightforce Solar | Jul 11, 2023 | Product guides, Solar Analytics
Transcription of the video above:00:00 Basic walkthrough:Let’s go through everything you need to know about solar analytics, such as, how to use the monitoring and also how to reset the device. 00:25 Dashboard:Your dashboard will show you live data and an...
by Lightforce Solar | Jul 11, 2023 | Energizer Homepower, Product guides
The video above covers basic data reading, how to create a reserve capacity on your Energizer Homepower battery and how to manually charge your battery from the national grid. To set up your app, you need to create an account first, then attach your battery to the...
by Lightforce Solar | Jul 11, 2023 | Energizer Homepower, Product guides
Turn off the Battery Turn off any circuits connected to the backup of the battery – Turn off the ‘UPS Supply Main Switch’ (if applicable) Turn off the Battery AC isolator located adjacent to the battery Open the grey flap on the battery and turn off...
by Lightforce Solar | Jul 11, 2023 | Energizer Homepower, Product guides
Written steps starting from 7:14 in the video above: So we’re going to click on the burger menu, which is the top right hand side of the app on an Android phone, hit settings and “application mode”. There are three types of application modes:...
by Lightforce Solar | Jul 11, 2023 | GoodWe, Product guides
Steps to shutdown your Goodwe Solar inverter Turn off the AC isolator switch followed by the DC isolator switch – they will be next to your inverter and labelled. To switch it back on, follow the steps in reverse turning the DC isolator switch on first followed...
by Lightforce Solar | Jul 11, 2023 | Product guides, Sungrow
Set Battery Reserve Capacity: 4:18 Set Battery Force Charge Schedule: 5:36 A written transcript of the video above.The initial basics of the Sungrow monitoring platform.Once you have the Sungrow app downloaded and you have your password details from an email that is...
by Lightforce Solar | Jul 11, 2023 | Product guides, Sungrow
Hybrid inverter Turn off any backup circuits on your switchboard as they will be impacted by the switching off of the inverter. Turn off the AC isolator switch next to the inverter followed by the DC isolator. If you have a battery attached to the inverter, you need...
by Lightforce Solar | Jul 11, 2023 | Frequently asked questions
The following maintenance recommendations must be carried out by someone who is trained and competent to do the work. For work you are competent to carry out on the solar system you must follow standard industry practice and safety requirements. Subsystem or component...
by Lightforce Solar | Jul 11, 2023 | Frequently asked questions
Time stamps: 00:00 – Introduction. 00:04 – Resetting the time of day on the timer. 00:22 – Setting the timer restrictions. 00:32 – The three settings of the hot water timer. 00:49 – Outro The blue teeth of Theben hot water timers dictate...
by Lightforce Solar | Jul 10, 2023 | GoodWe, Product guides
Via the SEMS Portal AppEnsure your inverter is currently not connected to WiFi, the power light on the inverter should be flashing and you are standing nearby to the inverter. How to steps: Open the SEMS Portal app Click “WiFi Configuration” on the...
by Lightforce Solar | Jul 10, 2023 | Frequently asked questions
00:01 – “If you have a GivEnergy battery that has dropped out of wifi connection, these are the steps to reconnect.” 00:07 – “So first of all, if you are using a desktop computer, then you’ll need to remove the USB from the bottom...
by Lightforce Solar | May 18, 2023
Steps of shut down your AlphaESS solar inverter Remove the front cover of the middle panel on the inverter and unclip the black panel. Switch off the “Battery” switch followed by the “Grid” switch, “Back-up” switch and “PV” switch in that order. To switch the system...
